1.Automatic Sandblasting Booth: MSA805060-300L2-2,QTY.：1 Set；
It is applied to sand blast ship accessories, sheet metal machining parts etc.
1. The equipment layout is compact and the floor space is small;
2. 4mm rubber is protected inside the blasting chamber, which has both protection and excellent sound reduction and noise reduction. The door of the chamber body adopts a double lip sealing structure with low noise and good sealing performance;
3. Using manual integrated button operation control, Zhengtai low-voltage electrical components, equipment and equipment are related to each other, safe and reliable;
4. Use 300L blasting pressure pipe system to ensure that the sand flow during the blasting process is sufficient, and no sand breakage occurs;
5. Using the screw pusher + hoist recovery system, the blasted pellets are automatically recovered after being dropped into the auger by the slope;
6. The total installed power is only about 31.2kw, which is more energy efficient;
7. Using secondary filtration technology, the dust emission is less than 80mg/m3;
8. Advanced noise reduction design, the noise is lower than 85dba;
9. With 8 sets of 600 lumens lighting, it can be controlled independently, easy to observe sandblasting.
Sand Blasting Room Size： L*W*H 8000*5000*6000mm
Sand Blasting Part size：Less than sand blasting room size
Part max. weight：7000kg
1 set sand blasting chamber,1 sets 300l high pressure sandblasting pot,1 set spiral pusher system,1 set elevator system,1 set separator system, 1 set dust collector system,1 set equipment manual, 1 set track system.