+86-752-2236 520

Hotline
Mayflay Automatic Rubber Belt Tumble Shot Blasting Machine MB200-P11-1 Is Used For Precision Casting Industry
Mayflay Automatic Rubber Belt Tumble Shot Blasting Machine MB200-P11-1 Is Used For Precision Casting Industry

Main Purchase Machine Model:

1.Automatic Rubber Belt Tumble Shot Blasting Machine: MB200-P11-12, QTY.:1 Set;


It is applied to shot blasting of precision castings such as carbon steel, stainless steel, alloy steel, special steel hardware fittings, vehicle parts, valve fittings and mechanical fittings.



The main features of this machine:



1. Suitable for surface cleaning of all kinds of small and medium-sized castings, forgings, hardware, pipes, etc.


2. End plate diameter: 1000mm;


3. Equipment dimensions: 3972mm x 2600mmx4800mm (length x width x height);


4. The workpiece single maximum weight: 30kg;


5. Maximum loading weight: 600kg;


6. Production efficiency: 2000-2500kg/h;


7. Adopt integrated design, small footprint, no pit;


8. Use spiral + hoist recovery system, and install photoelectric sensing device at the bottom to monitor and alarm the pellet recycling system;


9. Made of rubber track, rigid and wear-resistant, shot blasting for small and medium-sized parts that can collide with each other;


10. Using secondary filtration technology, the dust emission reaches 30mg/m3 (according to European indoor emission standards), with indoor emission standards, advanced noise reduction design, and noise below 85db;


11. Track-type shot blasting machine is a blasting machine that throws the projectile at a high speed to the continuously rolling workpiece on the track to achieve the purpose of cleaning. It has a wide range of applications and has been applied to the surface of small and medium-sized castings, forgings, stampings, gears, springs, etc. in machine tool factories, automobile plants, textile machinery factories, heat treatment workshops, etc. on the surface of workpieces, such as sand, rust, scale, burr. Surface treatment




Technology Data:

1.Automatic Rubber Belt Tumble Shot Blasting Machine: MB200-P11-12 main technology data

End plate diameter: 1000mm

Maximum loading weight: 600kg

Maximum single workpiece weight: 30kg

Configuration contains

1 set of shot blasting chamber / 1 set of screw pushing system / 1 set of hoist system / 1 set of sorter system / 1 set of semi-automatic flow valve / 1 set of casting type wheel blast / 1 set of loading system / 1 set of filter cartridge Type dust collector system / 1 set of maintenance platform / 1 set of electrical system (Siemens system) / 1 set of equipment manual (including electronic version)


Automatic Rubber Belt Tumble Shot Blasting Machine Clean The Parts:



Online MessageOnline Message
Contact Mailbox Contact Mailbox