+86-136-9284-1862

Hotline
Shot blasting and derusting production line for Marine engineering machinery parts
Shot blasting and derusting production line for Marine engineering machinery parts
The steel plates with rust used in shipyards will affect the quality of shipbuilding. It is impossible to use manual rust removal for the workload will be large. This requires a machine to remove rust to ensure the quality of shipbuilding. The profile pretreatment line can be solved. Now many domestic and international shipyards and steel mills have successfully applied our shot blasting machine. Our Q69 series steel plate pretreatment lines have also been exported to Australia and other foreign customers.
  • Derusting and cleaning of military missile destroyer surface
  • Derusting and cleaning coating on ship surface
  • Shot blasting and rust removal on ship surface
Container coating

Our shot blasting machine can effectively increase the service life of the paint film and improve its corrosion resistance of the container. At the same time, it can also improve the strength of the steel plate of the container and the resistance to mechanical wear.

Casting and Forging Cleaning

Most metal workpieces will produce surface oxidation during the heat treatment of forging heat treatment. This layer of oxidized scale will have a serious destructive effect on the chemical coating of the part so that requires shot blasting. For parts that need to be machined, the removal of oxide scale is a necessary condition to reduce tool wear, increase the service life of cutting tools, maintain the accuracy of the machine tool, and control the size of the forging billet to obtain the best cutting condition. This is even more important for automatic machining machines. Shot blasting of the final heat-treated workpiece can obtain the comprehensive effect of removing oxide scale and strengthening the workpiece. Almost most of the gears of automobiles, tractors and other vehicles need to be shot blasted after heat treatment.

  • Shot blasting of cast crankshaft surface
  • Shot blasting of casting cylinder surface
  • Shot blasting on German casting surface
  • Shot blast cleaning of impeller casting surface
  • Shot blasting on the surface of export casting pipe
  • Shot blast cleaning of motor shell
  • Shot blasting of engine block surface
  • Shot blasting of automobile engine cylinder external
  • Shot blasting of railway locomotive bogies
  • Shot blasting of machine tool box surface
  • Shot blasting of machine tool box surface
Coating and anticorrosion of steel structures

The steel structure must be derusted before use to meet the structural requirements of the state. Full automatic shot blasting machine eliminates the need for manual derusting and reduces the environmental pollution problem of pickling.

  • Company technicians at the sandblasting site of the Bird's Nest steel structure
  • Shot blast cleaning of steel structure
  • Shot blast cleaning of airport steel structure
  • Shot blasting of steel surface
  • Shot blast cleaning of steel surface of Hong Kong Convention and Exhibition Center
  • Steel surface pretreatment
  • Shot blasting of port machinery
  • Shot blasting of H-beam surface
Rail vehicle painting

Almost all railway locomotive factories and depots in the country have been equipped with complete vehicles or bolster side frame shot blasting machines. Automobile chassis, car bodies, key components, etc. also use a lot of cleaning equipment.

  • EMU high-speed train surface cleaning
  • Sandblast cleaning of passenger car surface
  • Shot blasting and rust removal on the surface of high-speed locomotive
  • Sandblasting and rust removal for Qinghai-Tibet railway
  • Shot blasting on the surface of railway wagons
  • Shot blasting on the surface of railway passenger cars
  • Shot blasting and derusting on the surface of urban light rail passenger cars
  • Shot blasting on the surface of high-speed buses
Shot blasting/ shot peening

Our metal abrasives and shot blasting equipment can be used to remove sticky sand and oxide scale on the surface of cast steel and cast iron in the foundry industry. Almost all steel castings, gray castings, martensitic steels, ductile irons, etc. need to be shot blasted. This is not only to remove the oxide scale and sticky sand on the casting surface, but also an indispensable preparation process before the quality inspection of the casting. For example, before the non-destructive inspection of large gas turbine casings, strict blast cleaning must be performed to ensure the inspection results reliability.

  • Shot peening on the surface of the chain
  • Shot peening of crankshaft forgings
  • Shot peening on the surface of connecting rod forgings
  • Shot blasting on crankshaft and connecting rod surfaces
  • Shot peening on the surface of gear after heat treatment,quenching, tempering
  • Surface blast strengthening after spring heat treatment
Port machinery anticorrosion

Our metal abrasives and shot blasting equipment can be used to remove sticky sand and oxide scale on the surface of cast steel and cast iron in the foundry industry. Almost all steel castings, gray castings, martensitic steels, ductile irons, etc. need to be shot blasted. This is not only to remove the oxide scale and sticky sand on the casting surface, but also an indispensable preparation process before the quality inspection of the casting. For example, before the non-destructive inspection of large gas turbine casings, strict blast cleaning must be performed to ensure the inspection results reliability.

  • Shot peening on the surface of the chain
  • Shot peening of crankshaft forgings
  • Shot peening on the surface of connecting rod forgings
  • Shot blasting on crankshaft and connecting rod surfaces
  • Shot peening on the surface of gear after heat treatment,quenching, tempering
  • Surface blast strengthening after spring heat treatment
Engineering machinery anticorrosion

Typical workpieces such as the five major components of the control excavator, bulldozer and so on.

  • Bulldozer painting after shot blasting
  • Bulldozer surface cleaning after shot blasting and rust removal
  • Surface blasting and rust removal of the excavator
  • Shot blasting and derusting on the surface of engineering vehicles
  • Shot blasting and derusting on the surface of engineering vehicles
  • Shot blasting and derusting coating on tanker vehicles
Corrosion protection of welded steel pipes

Typical workpieces such as the five major components of the control excavator, bulldozer and so on.

  • Bulldozer painting after shot blasting
  • Bulldozer surface cleaning after shot blasting and rust removal
  • Surface blasting and rust removal of the excavator
  • Shot blasting and derusting on the surface of engineering vehicles
  • Shot blasting and derusting on the surface of engineering vehicles
  • Shot blasting and derusting coating on tanker vehicles
Shot blasting on the surface of spiral welded pipe

Typical workpieces such as the five major components of the control excavator, bulldozer and so on.

  • Bulldozer painting after shot blasting
  • Bulldozer surface cleaning after shot blasting and rust removal
  • Surface blasting and rust removal of the excavator
  • Shot blasting and derusting on the surface of engineering vehicles
  • Shot blasting and derusting on the surface of engineering vehicles
  • Shot blasting and derusting coating on tanker vehicles
Non-ferrous and stainless steel casting cleaning

The surface cleaning of non-ferrous and stainless steel metal castings, such as aluminum alloys, copper alloys, etc., in addition to removing oxide scale and discovering surface defects of the castings, the more important purpose is to remove the burrs of the die castings by shot blasting and obtain decorative decoration Surface quality for comprehensive results.

  • Shot blast cleaning of aluminum alloy die castings
  • Shot blast cleaning of aluminum alloy die castings
  • Shot blast cleaning of aluminum alloy die castings
  • Shot blast cleaning of aluminum alloy die castings
  • Low-pressure cast aluminum wheel shot blasting
  • Shot blast cleaning of aluminum alloy die castings
  • Shot blast cleaning of aluminum alloy die castings
  • Shot blast cleaning of nickel-based alloy die castings
Sandblasting room surface cleaning
  • Sand blasting surface cleaning
  • Secondary blast cleaning of hull surface
  • Sandblasting of wind power tower surface
  • Secondary blast cleaning of hull section surface
  • Sandblasting of steel surfaces
Online MessageOnline Message
Contact Mailbox Contact Mailbox